- Stock: In Stock
- Model: TC08427
- Weight: 0.02kg
- Dimensions: 66.00mm x 96.00mm x 20.00mm
- SKU: TC08427
- UPC: 6009515848132
The Ø 6.4mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the TC08425 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust removal.
QTY: 12
Grit: P60
The shank of the rotary cutter is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.
Rotation speed:
Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.
All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.
The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
